SELECT MOD G2 BASE

The RESISTO SELECT MOD G2 BASE is an SBS modified, fiberglass reinforced base sheet.


Benefits

  • Clean, fast and easy installation
  • High tensile strength reinforcement
  • Remains flexible at low temperatures

Tests and certifications

UL
ISO-9001
ISO-14001

Function

Roofing

Product roles

Base Sheet Membranes

Building Component

Roofs

Technology

SBS modified bitumen

Types of Slope

  • Outside low slope
  • Outside very low slope
  • Inside slope

Type of covering

SBS modified bitumen membranes

Substrates

  • Asphaltic panel
  • Concrete
  • Exterior gypsum
  • Steel deck

Surface

Sand

Underface

Sand

Reinforcement

Glass mat

Application

Glued with hot bitumen

Thickness

47 mils (1.2 mm)

UV exposure

Not UV resistant, cover as soon as it is dry

Storage instructions

Rolls should be stored upright, tape side up, protected from weather damage and UV rays. If the products are stored outdoors, cover them with an opaque protective cover after removing the delivery packaging. Can withstand freezing but must be reactivated to at least 50 °F (10 °C) before installation.

Minimum application temperature

40 °F (4.5 °C)

Tools required

  • Knife
  • Tape measure

Surface Preparation

The substrate must be clean, dry, and free of dust, grease or other contaminants.

Restrictions

It is not recommended to install the membrane directly on wood boards. Cover the surface with a suitable panel or an underlayment membrane prior to the installation of the membrane. It is not recommended to use a product containing bitumen directly on softwood boards or flexible polyvinyl chloride.

SELECT MOD G2 BASE

Products

Product code

Width

Length

Gross area

Weight

SELECT MOD G2 BASE

Product code

08106

Width

36 in (0.91 m)

Length

98.23 ft (29.94 m)

Gross area

295 ft² (29.94 m²)

Weight

79 lb (36.05 kg)

Products

Barcodes

Product code

Units per skid

Boxes per skid

SELECT MOD G2 BASE

Barcodes

8 86442 08106 3

Product code

08106

Units per skid

20

Boxes per skid

20