SYNTHETIC ROOFING UNDERLAYMENT RESISTOR SF
This synthetic underlayment is a lightweight, woven polypropylene membrane coated with a non-skid TPO. It possesses very high tensile and tear strength, and can be used as temporary cover on exposed roof systems. Also, it is an alternative to asphalt felt boards.
Benefits
- Anti-slip
- Much lighter and durable than felt paper
- High tensile and tear strength
Tests and certifications
Properties
Function
Waterproofing
Product roles
Synthetic Underlayments
Building Component
Roofs
Technology
Polyolefin
Characteristics
Types of Slope
Outside low slope
Type of covering
- Asphalt shingles
- Sheet metal
Substrates
- Plywood
- OSB
- Wood
Surface
Polyolefin
Application
Nailed down
Service temperature
-40 °C to 116 °C (-40 °F to 240 °F)
Thickness
0.25 mm (10 mils)
UV exposure
90 days
Instructions
Storage instructions
Rolls should be stored upright, tape side up, protected from weather damage and UV rays. If the products are stored outdoors, cover them with an opaque protective cover after removing the delivery packaging.
Minimum application temperature
Can be used in any temperature
Maximum application temperature
Can be used in any temperature
Tools required
- Knife
- Tape measure
- Hammer
- Ring roofing nails 25 mm (1 in)
Surface Preparation
The substrate must be clean, dry, free of dust, and smooth with all the rough edges and asperities repaired or removed, e.g., nails and staples.
Restrictions
Pneumatic staple guns are not recommended.
Previous identity
Conditioning
Products
Product code
Width
Length
Gross area
Net area
Weight
SYNTHETIC ROOFING UNDERLAYMENT RESISTOR SF
Product code
22353
Width
42 in (1.07 m)
Length
286 ft (87.17 m)
Gross area
1,001.00 ft² (93.3 m²)
Net area
904 m² (84.3 ft²)
Weight
21 lb (9.53 kg)
Without box
Palletization
Products
Barcodes
Product code
Units per skid
SYNTHETIC ROOFING UNDERLAYMENT RESISTOR SF
Barcodes
6 23680 22353 0
Product code
22353
Units per skid
56