All Surfaces,
All Weathers,
No Primer.

Discover Our Membrane for Doors and Windows!

All Surfaces, All Weather, No Primer.

Discover Our Membrane for Doors and Windows!

RESISTO’S ALL-WEATHER BUTYL FLASHING TAPE is a self-adhesive membrane made of rubberized butyl which prevents air and water infiltration. It can be easily applied on wood, aluminum, polyethylene and PVC as well as air-barrier membranes and exterior fiberglass gypsum.

For a limited time, get 5× the points.

By submitting your invoices on the RESISTO REWARDS platform.

Applicable on the following product codes: #22767, #22858, #22860 and #22859.

An irresistible offer!

Get 5X
the Points

Offer valid from April 1 to May 21, 2019.

Why choose it?

Superior adhesion in a wide range of temperatures from 5 °F to 149 °F (-15 °C to 65 °C)

No primer needed, allowing for quick installation

The maximum adhesive strength is reached within 12 to 24 hours. During the installation process, the membrane is easy to handle thanks to its initial adhesive properties.

Compliance with the rigorous requirements of AAMA 711, which is recognized by most regulatory authorities

Thin tape which eliminates excess thickness and keeps the opening of the frame clear to facilitate the insertion of a window or door

Easy installation thanks to the split-back release silicone film

Complementary products

Elastomeric sealant

Corner guard

Exterior primer

Learn more about the product!

Installation Guide

Installation Recommended by RESISTO


Insert the ALL-WEATHER FLASHING TAPE corner guards on the weather barrier to prevent infiltration. Mechanically secure the ALL-WEATHER FLASHING TAPE corner guards.


Apply an ALL-WEATHER FLASHING TAPE strip on the lower part of the window and cover 2 to 3 in (5 to 7.5 cm) of the weather barrier.
Cut the membrane on each side of the opening and adhere it with a membrane roller.


Install a membrane strip from 2 to 3 in (5 to 7.5 in) on the weather barrier of the joist.


Lift the upper weather barrier. Adhere an ALL-WEATHER FLASHING TAPE strip to cover the top of the window.


Install the metal flashing according to the building code.


Fold the weather barrier membrane in place. Cut 1 in (2.5 cm) of the weather barrier to clear the metal flashing.


Seal the metal flashing corners by installing an ALL-WEATHER FLASHING TAPE membrane strip obliquely on each end.