TILE ROOFING UNDERLAYMENT - HIGH TEMPERATURE LASTOBOND TU-HT
This roof underlayment is a high-temperature SBS modified bitumen membrane that can be exposed to temperatures up to 257 °F (125 °C). The top face is composed of non-woven polyester, perfect for tile roofing applications. The self-adhesive underface is covered with a silicone split-back release film. Due to its remarkable characteristics, TILE ROOFING UNDERLAYMENT - HIGH TEMPERATURE LASTOBOND TU-HT meets the requirements of Miami Dade County (NOA 18-0329.03) and of Florida building code: FL2569.
Benefits
- Clean and easy installation
- Resistant to weather fluctuations
- 180-day exposure
- Suitable for foam applications as well as mechanically attached tiles
- Self-sealing membrane around nails and screws
Tests and certifications
Properties
Function
Roofing
Product roles
Roofing Underlayments
Building Component
Roofs
Technology
SBS modified bitumen
Characteristics
Types of Slope
Outside steep slope
Type of covering
- Asphalt shingles
- Metal roofing
- Slate tiles
Substrates
- Plywood
- OSB
- Asphaltic panel
Surface
Non-woven polypropylene
Underface
Two parts silicone release film (split-back)
Reinforcement
Glass mat
Application
Self-adhesive
Service temperature
Up to 257 °F (125 °C)
Thickness
67 mils (1.7 mm)
UV exposure
180 days
Instructions
Storage instructions
Rolls should be stored upright, tape side up, protected from weather damage and UV rays. If the products are stored outdoors, cover them with an opaque protective cover after removing the delivery packaging. Can withstand freezing but must be reactivated to at least 10 ° C (50 °F) before installation.
Minimum application temperature
50 °F (10 °C)
Tools required
- Knife
- Tape measure
- Smoothing roller
Surface Preparation
The substrate must be clean, dry, and free of dust, grease or other contaminants.
Restrictions
It is not recommended to use a product containing bitumen directly on softwood boards or flexible polyvinyl chloride. TILE ROOFING UNDERLAYMENT - HIGH TEMPERATURE LASTOBOND TU-HT allows for tile stacking up to a maximum of 10 tiles over a roof pitch up to maximum 6:12 for lugged or flat tiles without any slippage. For roof pitches in excess of these restrictions, use battens to stack the tiles, or contact RESISTO for alternate stacking methods.
Previous identity
Conditioning
Products
Product code
Width
Length
Gross area
Net area
Weight
Weight per skid
HIGH TEMPERATURE TILES ROOFING UNDERLAYMENT LASTOBOND TU HT
Product code
00300
Width
39 in (1 m)
Length
65.6 ft (20 m)
Gross area
213.20 ft² (20.0 m²)
Net area
190 m² (17.8 ft²)
Weight
67 lb (30.5 kg)
Weight per skid
2,425 lb (1,100 kg)
Without box
Palletization
Products
Barcodes
Product code
Units per box
Units per skid
Weight per skid
HIGH TEMPERATURE TILES ROOFING UNDERLAYMENT LASTOBOND TU HT
Barcodes
8 86442 00300 3
Product code
00300
Units per box
1
Units per skid
30
Weight per skid
2,425 lb (1,100 kg)
